|
Live Webinar Design Control Under 21 CFR 820 (the CGMPs) and ISO 13485
Everyday
10.00 PM
http://https://worldcomplianceseminars.com/webinardetails/366
Hollywood
FL Wisconsin 33021
Report Abuse
|
|
Live Webinar Design Control Under 21 CFR 820 (the CGMPs) and ISO 13485
Description
The FDA CGMPs (21 CFR 820.30) and ISO QMS’ (ISO 13485:2016 7.3) expect companies to perform meaningful, results driven Design Control activities as defined in the regulations / standards, for both new and changed devices. The company is held fully responsible for deciding when to start and the specific documentation (DHF, D&DF …) to meet the 10 requirements. Beyond compliance, these 10 elements can be a powerful tool in reducing "time to market" / "fast cycle" product development. In addition, growing high-profile field problems indicate that design control and it’s effect on regulatory review activities are not yet fully utilizing the power of current risk management and use / human factors tools, which must be a part of the design control process -- the ISO 14971 amd IEC 62366-1 "models". A growing push by the Agency to strengthen the 510(k) process, and review existing devices with above normal adverse events are additional concerns, to be factored into the design control process. The resulting documentation can have other far-reaching uses in a company. Proper design control requires a defined "start" date, and the systematic / SOP-defined implementation of formal methods with documented, and defensible, rationale. When properly executed, it is a powerful product development project management, training, compliance and IP tool.
Why should you attend
This webinar will discuss the 10 required elements of a Design Control System. It will consider different methods of implementation, and expectations of both the U.S. FDA and EU, proven by documentation. Such an analysis takes on added urgency as a result of the stated intent of the Agency to get tougher across the board in its expectations for the medical industry and what it (the FDA and industry) need to do to "toughen" the safety, usability, and efficacy of medical devices. Anticipation and addressing such on-going increased Agency / EU emphasis in product design and modifications / change control proactively will further prove a company is "in control" re: the CGMPs and ISO QMS, and assist documenting the entire medical product development process, assisting IP, failure investigations, root cause analysis, and provide templates for future product development.
Areas Covered
• Current Design Control Requirements – FDA and EU
• Defining the "Start" Date, When and How, and Its Significance
• The 10 “Must Have” Design Control Elements
• Implementation / Documentation
• "Retroactive" Design Control
• Integrating ISO 14971 and IEC 62366-1 and their Roles in the Design Control Process
• The Business (C-Suite) Case for Design Control
Who will Benefit
• Senior management
• R&D
• Engineering
• Software engineers
• Manufacturing / Operations
• Marketing
• Purchasing
• Consultants
• All others tasked with product development, acquisition and production
Industries who can attend
This 90-minute online course is intended for professionals in the Medical Device, Biotechnology,Pharmaceutical Industry. Although not presently stated in the draft , the same guide could be used by FDA Regulated Industries personnel.
Principal, J. E. Lincoln and Associates LLC
John E. Lincoln is Principal of J. E. Lincoln and Associates LLC, a consulting company, with over 32 years experience in U.S. FDA-regulated industries, 18 of which as a full time independent FDA-regulated industry consultant. Mr. Lincoln has worked with companies from start-up to Fortune 100, in the U.S., Mexico, Canada, France, Germany, Sweden, China and Taiwan. He specializes in quality assurance, regulatory affairs, QMS / CGMP audits and problem remediation and FDA responses, new / changed product 510(k)s, process / product / equipment including QMS and software validations, ISO 14971 product risk management files / reports, Design Control / Design History Files, Technical Files. He’s held positions in Manufacturing Engineering, QA, QAE, Regulatory Affairs, to the level of Director and VP (R&D).
|$179 One Dial-in One Attendee|$279 One Dial In - Max 10 attendees|$695 Multiple locations upto 5 dial in|$249 Available within 24 hrs after|$299 CD/DVD will be dispatched after
https://worldcomplianceseminars.com/webinardetails/366
|
conference manager
Phone: 03472825400
Email: subscribe (at) worldcomplianceseminars.com |
|
|
| Report Abuse |
|
|
| |
| |
|
| List your Event |
| | Similar Events | FL: Live Webinar Use / Human Factors Engineering to Satisfy the New IEC 62
Live Webinar Use / Human Factors Engineering to Satisfy the New IEC 62366-1, -2
Description
IEC has released a new medical device usability standard, IEC 62366-1:2015 -- Part 1: “Application of the new Usability Engineering Standard to Medic
Date Posted: 30-Apr-18
| Houston: Live Webinar :DHF, DMR, DHR, Technical File and Design Dossier - Key R
DESCRIPTION
This webinar will examine the existing and proposed requirements for the FDA's DHF - including its derivative documents, the DMR and DHR. It will consider the MDD's TF/DD requirements, and evaluate the documents' differing purposes / g
Date Posted: 27-Apr-16
| FL: Live Webinar Understanding and Implementing a Quality by Design Progra
Description
This training will explain the main principles behind a QbD approach and provide guidelines in how to implement the concepts into a pharmaceutical development organization. Topics covered will include the target product quality profile,
Date Posted: 26-Apr-18
| FL: Live Webinar Understanding and Implementing a Quality by Design Progra
Description
This training will explain the main principles behind a QbD approach and provide guidelines in how to implement the concepts into a pharmaceutical development organization. Topics covered will include the target product quality profile,
Date Posted: 26-Apr-18
| FL: Live Webinar Corrective and Preventive Action (CAPA) - Principles of L
Live Webinar Corrective and Preventive Action (CAPA) - Principles of Lean Documents and Lean Configuration
Description
Design controls involve the translation of user requirements (aka Voice of the Customer) into specific technical requirements a
Date Posted: 08-May-18
| FL: Live Webinar Understanding and Implementing a Quality by Design Progra
Description
This training will explain the main principles behind a QbD approach and provide guidelines in how to implement the concepts into a pharmaceutical development organization. Topics covered will include the target product quality profile,
Date Posted: 26-Apr-18
| Houston: Introduction to Risk Management: Medical Devices
DESCRIPTION
This webinar will cover Risk Management per ISO 14971 throughout the product lifecycle. Risk Management is an important process to methodically and effectively identifying and mitigating risks in the product design and manufacturing p
Date Posted: 18-Apr-16
| FL: Conducting a life sciences documentation and training gap analysis
Conducting a life sciences documentation and training gap analysis
Description
The relationship between government regulations, actual job tasks performed by workers, compliance requirements, equipment maintenance and
Date Posted: 27-Apr-18
| FL: Conducting a life sciences documentation and training gap analysis
Conducting a life sciences documentation and training gap analysis
Description
The relationship between government regulations, actual job tasks performed by workers, compliance requirements, equipment maintenance and operational requirements,
Date Posted: 29-May-18
| FL: Live Webinar Construct and Manage the Technical File and Design Dossie
Live Webinar Construct and Manage the Technical File and Design Dossier
Description
This Webinar will provide a substantive overview and outline differences between the Technical File and Design Dossier for those device firms dealing with the glo
Date Posted: 30-Apr-18
| Houston: Implementing a Change Control Quality System Successfully
DESCRIPTION
This course will help attendees understand the fundamental change control steps and processes. It will focus on change proposals, assessments, execution and final implementation. The importance of proper planning, critical thinking s
Date Posted: 15-Apr-16
| Houston: Auditing the Risk Management File - By Dan O Leary
DESCRIPTION
Medical device manufacturers must implement risk management systems for their devices. This can be a complicated system requiring a lot of work and multiple resources. If it is not correct, the regulatory authorities may require correc
Date Posted: 02-Feb-16
| Houston: Medical Devices: Handling, Storage, Distribution, and Installation
DESCRIPTION
Handling, Storage, Distribution, and Installation procedures need to be established for all manufacturers of medical devices. These procedures define and control how devices are handled, stored, distributed, and installed with custome
Date Posted: 15-Apr-16
| FL: Live Webinar Understanding and Applying the New EU Medical Device Regu
Live Webinar Understanding and Applying the New EU Medical Device Regulations (EMDR)
Description
The European Parliament just adopted the Medical Devices (MDR) and In vitro Diagnostic Medical Devices (IVDR) regulations. The adoption
Date Posted: 26-Apr-18
| FL: Live Webinar New and Expected Guidances on Data Standards and Electron
Live Webinar New and Expected Guidances on Data Standards and Electronic Submissions for Drugs and Medical Products
Description
Each FDA center has different guidelines and processes to follow in order to have a successful submission for the re
Date Posted: 30-Apr-18
|
|
Map locations are shown as per geocoding services and they depeneds on the accuracy of the address. If address is wrong it may show wrong map. If you put a listing which shows wrong map, please remove the listing and create a new one with correct address details.
Please note: The information on this site is submitted by users. CanadianDesi never checks accuracy of the information. Please use this information at your risk. If you have any question or concern regarding this listing, or you know that the above information is not accurate, please Contact Us. Thanks.
|
| Please note: The information on this site is submitted by users. CanadianDesi never checks accuracy of the information. Please use this information at your risk. If you have any question or concern regarding this listing, or you know that the above information is not accurate, please Contact Us. Thanks.
|
|
