1. Manufacturing Engineer

Contact:

Donna Duckett
Human Resource Associate
MEDA Engineering & Technical Services
http://www.medagroup.com" rel="nofollow">LINK
toll free: 1-888-518-6332
t:519-944-7221
f:519-944-6862
1575 Lauzon Road - Windsor - Ontario - N8S 3N4

Manufacturing Engineer – Direct role in Windsor
Position ID# 7650
EDUCATION:
• Certified Engineering Technologist professional designation or higher
• 4 - 5 years of working experience in the manufacturing engineering environment and automation industries
• Must be able to operate a CAD system (preferably CADKEY or Keycreator)
SKILLS:
• Self starter - highly energized, motivated and organized
• Extensive CRP knowledge and working experience (Capacity Resources Planning)
• Technical knowledge with equipment, plastic injection molding, auxiliary equipment, machine speed, work area / station layout, continuous improvement driven
• Must have good communication skills, both written and verbal
• Ability to work independently or well within a team environment
• Ability to work well under pressure and meet tight deadlines
RESPONSIBILITIES: but not limited to and reporting to the General Manager
• Coordination of activities associated with lean manufacturing to achieve the most effective and efficient way to manufacture products at high quality and reliable levels in a consistent basis.
• Also to assist Program Engineering in activities relating to new program launches and engineering changes, as required
• Manage launch activities such as run at rate, process development and all preproduction
• Develop, implement cell and plant layouts, with work instructions
• Optimize manufacturing operations thru analytical studies of the current operating parameters, such as, production methods and processes on a continuous basis
• Analyze, thru CAD and other systems, utilization, layout, workflow and shop floor inventory control and initiate appropriate activities to improve. I.E 5s etc.
• Participate in a cross-functional internal continuous improvement activities and document aspects of R&D for claiming purposes.
• Commission, sign-off and implement equipment for secondary operations.
• Working in compliance with Quality Business Operating Systems and health and safety and environmental legislation.
• Oversee the design, purchase, installation and operation of all plant equipment.
• Head up continuous improvement activities throughout the plant.

-----------------------------------------------------------------
Dimple2001

2. Manufacturing Engineer

Contact:
Diana Colley
Engineering Recruiter
commercial services
Aerotek
519.971.6411 Phone
519.256.5696 Fax
866.565.0421 Toll Free


Manufacturing Engineering opportunity here in Windsor, ON.

This is a PERMANENT opportunity in Windsor. Specifically, the ideal candidate will possess an Engineering degree, have 3-5+ years experience as a Manufacturing Engineer and be experienced with product launches, and automation within an automotive environment.

It is a very good opportunity with a well known company. The compensation is very competitive also.

-----------------------------------------------------------------
Dimple2001

During this apprentice electrician program, students alternate between on-the-job training with related classroom instruction.These are people that are actually responsible for the physical wiring of a number of different things. They are responsible for the wiring of houses, buildings, cars, planes, electronics and anything else that you can possibly think of that might require electricity in order to work.

Here is another opportunity for which I got a call from a recruiter. Contact the recruiter directly if you are qualified and interested.

The position is a Process Engineer / Manufacturing Engineer in Windsor area. Trevor is normally available from 9 to 5.

----------------------------------
I am an executive recruiter looking at filling an engineering position in Windsor.

Regards
Trevor de Silguy
Consultant
Sterling Consulting Group Inc.
705-719-4789 X228
877-719-4789 Toll Free
866-241-4875 Fax
trevor@sterlingconsulting.ca
---------------------------------------------------

-----------------------------------------------------------------
Dimple2001

Here's another opportunity received today for a position around Windsor area. Please contact the recruiter directly.

QUALITY ENGINEER


PURPOSE:

To ensure that the documented quality system is in place and meets or exceeds customers

requirements.



RESPONSIBILITIES:

. Monitor and assess the performance of the quality system on a regular basis, including Lead audits to maintain system integrity.

. Investigate and resolve internal and customer concerns.

. Administer and monitor the corrective action process of applicable concerns to ensure timely completion.

. Act as customer and supplier liaison for all quality issues, including the Mexican facility.

. Travel to Mexican facility and Customers as required. (Must have valid Passport)

. Lead Quality Technicians(s) re: Internal part rejection and disposition

. Maintain and report internal customer performance indicators and generate reports with corrective

actions as required on a timely basis.

. Coordination and completion of PPAP to customer.

. Develop, implement and update control plans for new or existing products.

. Measurement system control and analysis

. Perform Statistical Process studies as applicable

. Participates in Continuous improvement and FMEA activities

. Fulfills responsibilities upholding Health & Safety Policy and Legislation.

. Assists in preparing annual budget for the department.

. Must work as a team player and maintain good employee relations.

. Adheres to all company policies and procedures.

. Completes any other assignments, duties and projects that may be assigned.

. Maintains confidentiality of all information received from the customer/company



DESIRED QUALIFICATIONS:

. Engineering Degree or equivalent

. More than 3 years of quality systems development and improvement experience (preferably Automotive)

. Knowledge of TS 16949 quality systems and procedures

. Strong problem solving skills using advanced statistical techniques

. Knowledge of advanced SPC/DOE/QFD

. Knowledge of PPAP's

. Knowledge of Capability Indices

. Knowledge of Control Plans

. Knowledge of FMEA's

. Knowledge of IMDS

. Excellent interpersonal skills

. Excellent verbal and written communication skills

. Knowledge of E-Mail, Windows, Word, and Excel



This is an excellent career opportunity and as mentioned above is available immediately. If you're not available to pursue this opportunity, please feel free to forward this original email to any of your colleagues who you feel may be interested and qualified. Cheers!



Dan Bennett, BA (Hons), MIR
Founder & Principal Partner
The Executive Wing
Office 519.858.9839

dbennett@TheExecutiveWing.com

www.TheExecutiveWing.com

-----------------------------------------------------------------
Dimple2001

While engineering is a hands-on profession, you can definitely get all the fundamentals you need for an online engineering degree without setting foot inside a college or university.There are a number of things you should consider before taking an online engineering degree. Remember one thing, engineering is not for everyone.